Fitting A Basin Waste Without Leaks in 2021

Every basin has a basin waste. These things let the water pass through the pipes and if needed block the pipes if you need to fill up your basin with water.

But what happens when you have a leaky basin waste or it gets broken?

Well, replacing a basin is not that hard. It’ll become even easier when you’ll follow this guide we’re about to show you. After following our step-by-step instructions you’ll be able to install a basin waste in no time.

fitting a basin waste without leaks

Our guide on fitting a basin waste without leaks is the only guide you’ll ever need for this purpose. So, let’s dive in.

Why Should You Replace Your Basin Waste?

Well, many of us don’t give much thought about our basin waste. But it can negatively affect the style of your bathroom’s style. Also, wastes are vulnerable to limescale buildups and black mold that can be difficult to remove.

In extreme cases, wastes can also get caked with rust. That’s not a good look to have in a room where cleanliness is important for obvious reasons. So, a fresh basin waste will be on the table if a deep clean isn’t doing the trick.

Older wastes can cause mechanical failures in basin wastes, especially if you have a traditional pop-up basin waste. In such situations, we recommend switching to a new ‘click-clack’ basin waste.

Replacement of basin waste can also help to make the bathroom more attractive. For starters, if you’ve recently upgraded to matte black taps, a matching matte black basin waste can sync up with the look and bag you with a few extra style points!

Types of Basin Waste

Basin wastes also known as sink wastes are an important part of any bathroom. Although many times this component is overlooked.

 There are various types of basin waste available in the market. Each of them has its own set of styles and features. Here are some of the most popular basin waste.

Slotted and Unslotted

Before jumping into the types of basin wastes you need to know about a feature. It’s whether your basin is slotted or unslotted.

You need a slotted waste if your basin has a built-in overflow. On the other hand, if your basin doesn’t have an overflow you need an unslotted basin waste.

Well, now you know what slotted and unslotted means, but what is an overflow?

An overflow is a part of the drainage system. It helps by allowing air in the air when it’s filled with water. The air simply lets the water out faster. Slotted basin wastes allow the water to pass through the holes in an efficient way.

On the other hand, a basin without an overflow won’t be able to drain water so efficiently. You see, unslotted basin wastes don’t have holes in them. The drawback is, you can’t drain the water quickly.

Click Clack

The click-clacks are the most popular basin waste in the market. Advancements in the bathroom technology have brought modern waste systems like click-clack basin waste.

In fact, this basin waste has some other names too. Clicker, push-button, and sprung plug are some of the examples.

The click-clack basin waste is very easy to use. Simply click the pusher once to close the click-clack and push once again to open it.

Flip Top

The flip-top basin waste has a disc-shaped stopper that rotates, flips, or repositions itself to seal or open the drain. Unlike the click-clack model, you don’t have to do anything to open or close the drain.

The flip-top model is aesthetically pleasing and can blend in easily into any modern, sophisticated bathroom.

Pop Up

Pop-up basin wastes use a waste lever to operate. You simply have to push the lever to raise or lower the stopper. Generally, these things come along with basin taps and you have a control that’s usually at the rear of the tap.

This type of basin waste is very easy to use. Moreover, it has a modern, simplistic look which makes it a popular option.

Plug and Chain

Plug and chain basin wastes are as the suggests works by pulling the chain and putting it back into place. This conventional basin waste is an all-time classic for many people.

However, many modern designs don’t have a hole for the chain. So, make sure to check for it first.

How to Remove an Old Basin Waste

Removing an old basin waste isn’t that hard. But when working with these things, following everything step-by-step is the key. So, here’s how you can remove an old basin waste.

Tools and Materials

  • Bucket
  • Pliers
  • Cleaning Cloth
  • Screwdriver

Step 1: Turn Off The Water Supply

This is just a precautionary step so that you don’t flood your bathroom. Just turn off the water supply valve and you’ll be done. You can often find it underneath the sink.

Step 2: Unscrew The Basin Trap

Put your bucket right under your basin’s trap. Then, take your pliers and lightly loosen the trap. Continue losing the trap until you unscrew it by hand.

After removing the trap, make sure to keep the rubber seal safe. You have to buy another one or replace it with a suitable O-ring if you lose it. So, keep it somewhere safe where you’ll remember.

Step 3: Remove The Basin Waste

You should find a large hexagonal screw securing your basin waste to the basin. Unscrew the nut with a plier. After this, remove the rubber seal before attempting to remove the basin waste completely.

Sometimes the rubber seal is sealed with silicone. In this case, use a screwdriver to remove the silicone and pry it free.

Step 4: Clean Any Mess

Take a cleaning cloth and soak it with warm water. Use this cloth to clean up any silicone residue.

5 Steps of Fitting a Basin Waste Without Leaks

You should let trained professionals do most bathroom and plumbing works. A professional doing this kind of work will ensure a long-lasting and perfect installation.

However, projects such as fitting a basin waste are easy to do and can sure save you a lot of money. So, let’s see how you can fit a new basin waste with a  few tools.

Tools and Materials

  • Cleaning equipment
  • Bucket
  • Pliers
  • Sealant gun
  • Silicone Sealant
  • Basin waste
  • Nuts and Washers
  • Screwdriver

It should only take a few minutes to do this project. Although it can change if you have to remove the entire basin or if it’s in a difficult position.

Step 1: Turn Off The Water Supply

It’s always better to turn off the water supply when working with bathroom and plumbing materials. While you don’t have anything to do with the taps, it’ll prevent an accident if you somehow damage the taps.

Step 2: Remove The Basin If Necessary

First, remove the basin from the countertop or stand to access it. Although the technique might change depending on the type of basin you have. If it’s on a countertop or a wall there should be silicone seals. Cut off the silicone and you’ll be good to go.

Although,if your basin is attached to a wall and if you somehow damage it, don’t forget to repair the drywall.

However, if you already have access to the basin waste you can skip this step. And we already explained in detail how you can remove the basin waste.

Step 3: Attach The New Basin Waste

Most of the basin wastes come fully assembled from the manufacturer. So, you need to install it. First, remove the hexagonal nut with a plier if it’s tightened. Then, remove the washer from the basin waste.

Now, you have to use some silicone sealant. Always try to use top quality silicone sealants as they don’t cost much for the excellent service they provide.

Apply some silicone sealant on the edge of the hole. Now, attach the rubber washer and hexagonal nut so that it stays in place.

Also, don’t forget to apply another layer of silicone sealant. If you want to be extra sure, you can use a silicone spray too.

Step 4: Test If There Are Any Leaks

Testing for leaks is quite important in these situations. However, you should wait for at least 24 hours(or how much time it takes for the silicone sealant to dry) before you use the tap.

If there’s a leak, you’ll need to take apart the trap and waste to check if you’ve made any mistakes. A piece of advice, always make sure there’s a tight fit.

Step 5: Install The Basin

This step is only applicable if you had to remove the basin from the countertop. When reattaching the basin remember to put a layer of silicone sealant.

Congratulations! That’s all you need to know about installing a basin waste. This quick project shouldn’t take more than 10-12 minutes of your time if you don’t have to remove the basin.

Wrapping Up

Well, that’s all there is to know about fitting a basin waste without leaks. If you followed step-by-step you should now be the proud owner of pristine, fully functioning basin waste.

While you shouldn’t face any major complications when installing a new basin waste but if you do call a trained professional. Sometimes, calling a professional can be a better choice. You never know when you’ll unintentionally damage something pricey. Enjoy unbiased articles. peace!